Concrete Batching Plant Daily Maintenance

Concrete batching plant daily maintenance is very important,so,we should do well to every part.
1.  Assure the machine and the environment clean.
2. Clears the accumulation in the hopper timely to make the sensor properly back to zero.
3.  Check the adequacy of the lubricating oil of lubrication points, oil mist collector in the pneumatic system should maintain sufficient quantity of oil.
4. Check motors, electrical appliances to have overheating, abnormal noises, and instrument indicating whether normal, signaling system is intact.
5. Regular inspection and adjustment to butterfly valve and cylinder, electric pneumatic valve, making opening and closing meet the demand.
6. Regular checks of systems, if find ash spills, gas leakage, oil spills and electric leakage, should deal with timely.
7. Concrete mixers and discharge hopper should be cleaned once every four hours, in order to avoid residual concrete consolidation, interfering with normal run.
8. Each class should be placed off the internal water of air compressor, gas storage tanks and filter, and get rid of the troubles during running.
9. Butterfly valves, electromagnetic valves, concrete mixers, air filters and oil mist collector in accordance with the relevant instructions maintenance.
10. Before per shift must be unloaded check for belt conveyor, clean up debris, clay loam, and so on, fastening screws each part, adjusting the belt deviation phenomena, all rotating parts rotate flexible.
11. Electric drum should change the oil on a regular basis as the operating instruction.
12. Check and complement the grease of each moving parts bearing after using six months, later once a year to conduct a comprehensive demolition of oil.