Mixing Quality of Concrete Mixing Plant

The concrete mixer host of concrete mixing plant in working, the drive mechanism drives two mixing shafts reversing rotation at the same time. Each mixing shaft respectively layout 4~8 mixing arms and the two side mixing arms, mixing blades and scraping blades are equipped on it. After material inputs concrete mixer, through the stirring of mixing blades and scraping blades to coarse and fine aggregate, and admixture agent makes mixtures do the radial and axial movement in tank body, and form the convection in the cross area of two a mixing axis middle, achieved strongly mixing of material, thus makes mixing quality better, and more uniform.
Concrete mixing plant adopts the double horizontal forced concrete mixer. Twin-shaft compulsory concrete mixer has some advantages, such as strong mixing ability, uniform mixing quality, high productivity and so on, and the mixing effect is best to dry, semi dry, good plasticity and proportioning of concrete. Lubrication system and the spindle drive system use a full set of imported, its hydraulic opening mechanism can adjust the unloading valve as needed. Mixers-mixing shaft preventing adhesion technology, effectively prevent the cement from caking on the shaft, shaft seal using a unique multiple-seal structure, effectively prevent leakage of mortar and ensure that the entire run of continuous mixing system. Washing system uses high pressure water pump automatic control and manual control, just above the outlet hole at the mixing shaft to improve mixing efficiency, increase water spray to reduce dust pollution, and effectively remove the cement lumps.
High degree of localization of the host and its major components in recent years, many concrete mixing plant manufacturers in China using and absorbing foreign host technologies have developed a host of multiple brands, such as the Siemens host with Italy technology, Shi cosmos master, Germany hosts BHS technology and so on, this on a certain extent, solves the problem of the mass defect of our concrete mixer host. In the current, major components most adopt the electrical equipment and hydraulic components made by Sino-foreign joint venture or foreign wholly-owned, such as Toledo, Schneider, Siemens and Omron components, these are relatively stable, so that domestic cost has been greatly reduced, and quality and stability is not less than imported concrete mixing plant.